Driver side lean


















 · Go over to drivers side and it is 1/4" from hitting the bump stop. The drivers side overload spring was bouncing off the stop on every bump which is an absolute awful design IMO. Obviously the truck is leaning so I whip out the tape measure. 6" of bed rail clearance with the 5th wheel on passenger side and " on drivers side. Not cool at www.doorway.ru Interaction Count:  · The front is 5/8" lower on the driver's side and the rear is only 1/4" lower on the driver's side. The difference does seem to be more or less from time to time for no apparent reason. F CCLB SRWUser Interaction Count:  · Originally Posted by OCMEDIC. I have always been curious what the easiest method was for correcting driver side lean. Before I got my CBI bumper and just had my radflo front and rear set up if I took a tape measure and measure from the top of the tire to the fender in the rear it sagged about 1 1/2 in on the driver side.


I had almost 1" lean on the driver side. with stock suspension I had no lean. TheBeast, # Jbtaco likes this. at PM #20 # Pretty much every vehicle has a lean, trucks more so that cars. Driver side equipment (dash, electronics, gas tank, driver weight, ect all add up. Springs and shocks are the same on both side so the side carrying more weight will be a hair lower. Don't fret, nothing to take it to the dealer to they will tell you it is with in specs. If you go look at almost every truck made, you should notice the vehicle leans to the driver side. Some trucks are worse than others. My Tundra does it alot less than my Silverado that I had.


I have about a 1/2 to 3/4 inch lean on my truck towards the driver side. My dealer has contacted toyota about it and I am waiting on a. Driver side lean,about 2 1/4 drop any recommendations on solution? eibach pro lift w/ JBA UCA. Sep 3, Tacomas 4Runners - OME Driver's Side Lean Best Fix??? - I have just recently installed the / OME springs with.

0コメント

  • 1000 / 1000